jQuery.queue ()를 사용하여 Ajax 요청 대기열
나는 처음으로 jQuery.queue ()를 사용하고 있으며 그것을 잘 이해하지 못했습니다. 누군가 내가 뭘 잘못하고 있는지 지적 해 주시겠습니까?
방화범을 살펴보면 POST 요청이 동시에 실행되는 것을 볼 수 있으므로 잘못된 위치에서 dequeue ()를 호출하고 있는지 궁금합니다.
또한-대기열 길이를 어떻게 얻을 수 있습니까?
이러한 요청을 대기열에 넣어야하는 이유는 버튼 클릭시 실행되기 때문입니다. 그리고 사용자가 여러 버튼을 빠르게 연속으로 클릭 할 수 있습니다.
내 코드의 기본 구조를 제거하려고 시도했습니다.
$("a.button").click(function(){
$(this).doAjax(params);
});
// method
doAjax:function(params){
$(document).queue("myQueueName", function(){
$.ajax({
type: 'POST',
url: 'whatever.html',
params: params,
success: function(data){
doStuff;
$(document).dequeue("myQueueName");
}
});
});
}
여기서 문제 .ajax()
는 비동기 실행 Ajax 요청을 실행 한다는 것 입니다. 즉, .ajax()
즉시 반환되며 차단되지 않습니다. 따라서 대기열에 함수가 있지만 설명한 것처럼 거의 동시에 실행됩니다.
나는 .queue()
ajax 요청을 받기에 좋은 곳 이라고 생각하지 않으며 fx methods
. 간단한 관리자가 필요합니다.
var ajaxManager = (function() {
var requests = [];
return {
addReq: function(opt) {
requests.push(opt);
},
removeReq: function(opt) {
if( $.inArray(opt, requests) > -1 )
requests.splice($.inArray(opt, requests), 1);
},
run: function() {
var self = this,
oriSuc;
if( requests.length ) {
oriSuc = requests[0].complete;
requests[0].complete = function() {
if( typeof(oriSuc) === 'function' ) oriSuc();
requests.shift();
self.run.apply(self, []);
};
$.ajax(requests[0]);
} else {
self.tid = setTimeout(function() {
self.run.apply(self, []);
}, 1000);
}
},
stop: function() {
requests = [];
clearTimeout(this.tid);
}
};
}());
이것은 완벽 함과는 거리가 멀다. 나는 단지가는 길을 보여주고 싶다. 위의 예는 다음과 같은 방식으로 사용될 수 있습니다.
$(function() {
ajaxManager.run();
$("a.button").click(function(){
ajaxManager.addReq({
type: 'POST',
url: 'whatever.html',
data: params,
success: function(data){
// do stuff
}
});
});
});
비슷한 일을해야 했으므로 여기에 솔루션을 게시 할 것이라고 생각했습니다.
기본적으로 내가 가진 것은 모두 고유 한 기준을 가진 선반에 프로젝트를 나열하는 페이지입니다. 나머지는로드하는 동안 사용자가 볼 수있는 일부 콘텐츠를 사용자에게 더 빨리 제공하기 위해 전체가 아닌 하나씩 선반을로드하고 싶었습니다.
기본적으로 각 선반의 ID를 PHP에서 호출 할 때 사용하는 JS 배열에 저장했습니다.
그런 다음 호출 될 때마다 배열에서 첫 번째 인덱스를 팝하고 팝된 ID에 대한 선반을 요청하는 재귀 함수를 만들었습니다. 에서 응답을 받았 $.get()
거나 $.post()
선호하는 것을 사용하면 콜백 내에서 재귀 함수를 호출합니다.
다음은 코드에 대한 정교함입니다.
// array of shelf IDs
var shelves = new Array(1,2,3,4);
// the recursive function
function getShelfRecursive() {
// terminate if array exhausted
if (shelves.length === 0)
return;
// pop top value
var id = shelves[0];
shelves.shift();
// ajax request
$.get('/get/shelf/' + id, function(){
// call completed - so start next request
getShelfRecursive();
});
}
// fires off the first call
getShelfRecursive();
이 매우 간단한 코드를 사용하여 ajax 호출이 서로 "추월"하지 못하도록합니다.
var dopostqueue = $({});
function doPost(string, callback)
{
dopostqueue.queue(function()
{
$.ajax(
{
type: 'POST',
url: 'thephpfile.php',
datatype: 'json',
data: string,
success:function(result)
{
dopostqueue.dequeue();
callback(JSON.parse(result));
}
})
});
}
대기열이 자체적으로 처리하지 않도록 dequeue
하려면 함수에서를 제거하고 다른 함수에서 호출하면됩니다. 큐 길이를 가져 오는 방법은 다음과 같습니다.
dopostqueue.queue().length
알 수없는 수의 ajax 호출에 대해이 작업을 수행해야했습니다. 대답은 각각을 배열에 넣은 다음 다음을 사용하는 것입니다.
$.when.apply($, arrayOfDeferreds).done(function () {
alert("All done");
});
jQuery를 확장 할 수 있습니다.
(function($) {
// Empty object, we are going to use this as our Queue
var ajaxQueue = $({});
$.ajaxQueue = function(ajaxOpts) {
// hold the original complete function
var oldComplete = ajaxOpts.complete;
// queue our ajax request
ajaxQueue.queue(function(next) {
// create a complete callback to fire the next event in the queue
ajaxOpts.complete = function() {
// fire the original complete if it was there
if (oldComplete) oldComplete.apply(this, arguments);
next(); // run the next query in the queue
};
// run the query
$.ajax(ajaxOpts);
});
};
})(jQuery);
다음과 같이 사용하십시오.
$.ajaxQueue({
url: 'doThisFirst.php',
async: true,
success: function (data) {
//success handler
},
error: function (jqXHR,textStatus,errorThrown) {
//error Handler
}
});
$.ajaxQueue({
url: 'doThisSecond.php',
async: true,
success: function (data) {
//success handler
},
error: function (jqXHR,textStatus,errorThrown) {
//error Handler
}
});
물론 $ .ajax를 확장하므로 type, data, contentType, DataType과 같은 다른 $ .ajax 옵션을 사용할 수 있습니다.
위의 솔루션이 다소 복잡하다는 것을 알게되었고 전송 직전에 요청을 변경해야했습니다 (새로운 데이터 토큰을 업데이트하기 위해).
그래서 저는 이것을 하나로 합쳤습니다. 출처 : https://gist.github.com/2470554
/*
Allows for ajax requests to be run synchronously in a queue
Usage::
var queue = new $.AjaxQueue();
queue.add({
url: 'url',
complete: function() {
console.log('ajax completed');
},
_run: function(req) {
//special pre-processor to alter the request just before it is finally executed in the queue
req.url = 'changed_url'
}
});
*/
$.AjaxQueue = function() {
this.reqs = [];
this.requesting = false;
};
$.AjaxQueue.prototype = {
add: function(req) {
this.reqs.push(req);
this.next();
},
next: function() {
if (this.reqs.length == 0)
return;
if (this.requesting == true)
return;
var req = this.reqs.splice(0, 1)[0];
var complete = req.complete;
var self = this;
if (req._run)
req._run(req);
req.complete = function() {
if (complete)
complete.apply(this, arguments);
self.requesting = false;
self.next();
}
this.requesting = true;
$.ajax(req);
}
};
타이머가없는 jAndy의 답변의 또 다른 버전.
var ajaxManager = {
requests: [],
addReq: function(opt) {
this.requests.push(opt);
if (this.requests.length == 1) {
this.run();
}
},
removeReq: function(opt) {
if($.inArray(opt, requests) > -1)
this.requests.splice($.inArray(opt, requests), 1);
},
run: function() {
// original complete callback
oricomplete = this.requests[0].complete;
// override complete callback
var ajxmgr = this;
ajxmgr.requests[0].complete = function() {
if (typeof oricomplete === 'function')
oricomplete();
ajxmgr.requests.shift();
if (ajxmgr.requests.length > 0) {
ajxmgr.run();
}
};
$.ajax(this.requests[0]);
},
stop: function() {
this.requests = [];
},
}
쓰다:
$(function() {
$("a.button").click(function(){
ajaxManager.addReq({
type: 'POST',
url: 'whatever.html',
data: params,
success: function(data){
// do stuff
}
});
});
});
learn.jquery.com 웹 사이트 에도 좋은 예가 있습니다 .
// jQuery on an empty object, we are going to use this as our queue
var ajaxQueue = $({});
$.ajaxQueue = function(ajaxOpts) {
// Hold the original complete function
var oldComplete = ajaxOpts.complete;
// Queue our ajax request
ajaxQueue.queue(function(next) {
// Create a complete callback to invoke the next event in the queue
ajaxOpts.complete = function() {
// Invoke the original complete if it was there
if (oldComplete) {
oldComplete.apply(this, arguments);
}
// Run the next query in the queue
next();
};
// Run the query
$.ajax(ajaxOpts);
});
};
// Get each item we want to copy
$("#items li").each(function(idx) {
// Queue up an ajax request
$.ajaxQueue({
url: "/ajax_html_echo/",
data: {
html: "[" + idx + "] " + $(this).html()
},
type: "POST",
success: function(data) {
// Write to #output
$("#output").append($("<li>", {
html: data
}));
}
});
});
나는 또한 내가 가진 솔루션 내에서 이것을해야했고 다음과 같이 할 수 있음을 알았습니다.
//A variable for making sure to wait for multiple clicks before emptying.
var waitingTimeout;
$("a.button").click(function(){
$(this).doAjax(params);
clearTimeout(waitingTimeout);
waitingTimeout = setTimeout(function(){noMoreClicks();},1000);
});
// method
doAjax:function(params){
$(document).queue("myQueueName", function(next){
$.ajax({
type: 'POST',
url: 'whatever.html',
data: params,
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function(data){
doStuff;
next();
},
failure: function(data){
next();
},
error: function(data){
next();
}
});
});
}
function noMoreClicks(){
$(document).dequeue("myQueueName");
}
next()
대기열 함수에서 전달 된 콜백을 사용하여 다음 작업을 대기열에서 빼낼 수 있습니다. 따라서 다음을 ajax의 핸들러에 넣으면 브라우저와 브라우저의 렌더 또는 페인트 스레드에 대해 비동기식으로 ajax 호출을 효과적으로 수행 할 수 있지만 서로 동기 또는 직렬화됩니다.
다음은 매우 기본적인 예입니다. 예제 바이올린에서. 버튼을 한 번 클릭하고 잠시 기다리십시오. 시간 초과가 트리거되고 단일 작업이 발생하는 것을 볼 수 있습니다. 다음으로 가능한 한 빨리 (또는 1 초 이상) 버튼을 클릭하면 버튼을 클릭 할 때마다 작업이 대기열에 들어간 다음 잠시 기다린 후에 만 페이지에 도달하고 1 초 후에 페이드 인되는 것을 볼 수 있습니다. 다른 하나.
이것의 장점은 큐가 이미 비우고있는 경우 비우는 동안 추가 한 모든 작업이 끝에 배치 된 다음 시간이되면 처리된다는 것입니다.
다음은 일부 브라우저 게임에 대한 요청 대기열을 생성하는 데 사용하는 솔루션입니다. 어떤 일이 발생하면이 대기열을 중지하고 특별한 마지막 요청 또는 정리 작업을 완료합니다.
var get_array = ["first", "second", "third"];
var worker = $("<div />"); // to line up requests in queue
$.queuedAjax = function(args){ // add up requests for me
worker.queue(
function(next){
$.ajax(args).always(next);
}
);
};
$.queuedSomething = function(){ // add up something special for me
worker.queue(
function(next){
//worker.clearQueue();
//worker = $("<div />"); //cleanup for next .each
//maybe another .each
}
);
};
$.each( get_array , function( key , value ) {
$.queuedAjax({
type: 'GET',
url: '/some.php?get='+value,
dataType: 'text',
success: function(sourcecode){
if (sourcecode.match(/stop your requests, idiot!/)) {
worker.clearQueue().queue($.queuedSomething);
alert(' the server told me to stop. i stopped all but not the last ´$.queuedSomething()´ ');
}
}
});
});
$.queuedSomething();
nodejs에 대해 작성한 다중 스레드 큐 러너의 또 다른 예입니다. jquery 또는 angular에 맞게 조정할 수 있습니다. 약속은 API마다 약간 다릅니다. 저는이 패턴을 SharePoint의 큰 목록에서 모든 항목을 추출하여 모든 데이터를 가져 오는 여러 쿼리를 만들고 한 번에 6 개를 허용하여 서버에서 부과하는 제한을 방지하는 등의 작업에 사용했습니다.
/*
Job Queue Runner (works with nodejs promises): Add functions that return a promise, set the number of allowed simultaneous threads, and then run
(*) May need adaptation if used with jquery or angular promises
Usage:
var sourcesQueue = new QueueRunner('SourcesQueue');
sourcesQueue.maxThreads = 1;
childSources.forEach(function(source) {
sourcesQueue.addJob(function() {
// Job function - perform work on source
});
}
sourcesQueue.run().then(function(){
// Queue complete...
});
*/
var QueueRunner = (function () {
function QueueRunner(id) {
this.maxThreads = 1; // Number of allowed simultaneous threads
this.jobQueue = [];
this.threadCount = 0;
this.jobQueueConsumer = null;
this.jobsStarted = 0;
if(typeof(id) !== 'undefined') {
this.id = id;
}
else {
this.id = 'QueueRunner';
}
}
QueueRunner.prototype.run = function () {
var instance = this;
return new Promise(function(resolve, reject) {
instance.jobQueueConsumer = setInterval(function() {
if(instance.threadCount < instance.maxThreads && instance.jobQueue.length > 0) {
instance.threadCount++;
instance.jobsStarted++;
// Remove the next job from the queue (index zero) and run it
var job = instance.jobQueue.splice(0, 1)[0];
logger.info(instance.id + ': Start job ' + instance.jobsStarted + ' of ' + (instance.jobQueue.length + instance.jobsStarted));
job().then(function(){
instance.threadCount--;
}, function(){
instance.threadCount--;
});
}
if(instance.threadCount < 1 && instance.jobQueue.length < 1) {
clearInterval(instance.jobQueueConsumer);
logger.info(instance.id + ': All jobs done.');
resolve();
}
}, 20);
});
};
QueueRunner.prototype.addJob = function (func) {
this.jobQueue.push(func);
};
return QueueRunner;
}());
Using a framework which provides observable support such as knockout.js you can implement an observing queue which when pushed onto will enqueue the call and a shift will process the process.
A knockout implementation would look like the following:
var ajaxQueueMax = 5;
self.ajaxQueue = ko.observableArray();
self.ajaxQueueRunning = ko.observable(0);
ko.computed(function () {
if (self.ajaxQueue().length > 0 && self.ajaxQueueRunning() < ajaxQueueMax) {
var next = self.ajaxQueue.shift();
self.ajaxQueueRunning(self.ajaxQueueRunning() + 1);
$.ajax(next).always(function () {
self.ajaxQueueRunning(self.ajaxQueueRunning() - 1);
});
}
});
Observe that we take advantage of the observables telling us when we should send off another ajax request. This method can be applied in a more generalised form.
As an example, imagine you had a knockout mapping that retrieved lots of entries but you needed to call another service per item to enrich them, say set a value.
self.widgets = ko.observableArray();
ko.computed(function () {
var mapping = {
create: function (options) {
var res = ko.mapping.fromJS(options.data);
res.count = ko.observable();
// widget enrichment.
self.ajaxQueue.push({
dataType: "json",
url: "/api/widgets/" + options.data.id + "/clicks",
success: function (data) {
res.count(data);
}
});
return res;
}
};
// Initial request for widgets
$.getJSON("/api/widgets", function (data) {
ko.mapping.fromJS(data, mapping, self.widgets);
});
});
ReferenceURL : https://stackoverflow.com/questions/4785724/queue-ajax-requests-using-jquery-queue
'programing' 카테고리의 다른 글
텍스트 필드 깜박이는 커서 숨기기 (0) | 2021.01.17 |
---|---|
필요하지 않은 속성이 계속 data-val-required 속성을 가져옵니다. (0) | 2021.01.17 |
HQL "is null"및 Oracle 열의 "! = null" (0) | 2021.01.17 |
Trac 대 Redmine (0) | 2021.01.17 |
mysql에서 이름으로 그룹화하기 전에 날짜 및 시간으로 정렬 (0) | 2021.01.17 |